Aluminum is an ideal material for outdoor, patiofurniture as it requires very little maintenance. It is strong, non-rusting, and very weather resistant. Below are a few guidelines, which, if followed, will allow you to enjoy your furniture for many years.
CARE AND MAINTENANCE
Frames and Finishes
Apply a coat of non-hazing automotive paste wax at the start of each summer season as well as before putting your furniture away for the winter. To clean, wipe down the frames occasionally with water mixed with liquid detergent and rinse thoroughly afterwards.
Many stains can be removed with mild soap (Liquid Ivory or Joy) and water. Use "Soft Scrub" to remove more stubborn stains and light scratches. Industry cleaners are also available.
Try to touch-up nicks and scratches promptly. When applying touch-up paint, please follow instructions and cautions on product labels. Begin by rubbing lightly with a fine steel wool to smooth the surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying time between coats. When complete, wax repaired area with a non-hazing automotive paste wax.
Glass Table Tops
Clean glass table tops regularly with a soft cloth, mild detergent (Liquid Ivory or Joy), vinegar and warm water. With a lint free clean cloth, buff dry. Commercial glass cleaners may also be used. Avoid using solvents, scouring agents, janitorial cleaners or gasoline.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
Aluminum is an ideal material for outdoor furniture. It is strong, non-rusting, low maintenance and very resistant to the weather. Below are a few guidelines, which, if followed, will allow you to enjoy your furniture for many years.
CARE AND MAINTENANCE
Frames and Finishes
Apply a coat of non-hazing automotive paste wax at the start of each season as well as before putting your furniture away at the end of the season. Wipe down the frames occasionally with water mixed with liquid detergent and rinse thoroughly afterwards. During winter storage, do not store the frames upside down as damage may occur from water freezing inside the tubing.
Many stains can be removed with mild soap (Liquid Ivory or Joy) and water. Use "Soft Scrub" to remove more stubborn stains and light scratches. Industry cleaners are also available.
Try to touch-up nicks and scratches promptly. When applying touch-up paint, please follow instructions and cautions on product labels. Begin by rubbing lightly with a fine steel wool to smooth the surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying time between coats. When complete, wax repaired area with a non-hazing automotive paste wax.
Spray WD 40 oil on chair swivels and glides twice a season to maintain the free movement.
Straps and Lacing
Strapping should be cleaned regularly with a mild soap or detergent and warm water or with a water and ammonia mixture (1 cup ammonia per 3 gallons of water). Avoid abrasive cleaners.
Certain suntan lotions, blocks and insect repellents can permanently discolour vinyl. This problem can be minimized by cleaning the vinyl immediately after contact with an ammonia mixture. (*Use of a beach towel over the vinyl will prolong its life in these situations).
To remove scuffmarks on vinyl straps, apply toothpaste or a gentle commercial non-abrasive cleaner (Bon Ami or Vim) to a clean, slightly damp cloth and rub gently. Restore shine with a non-hazing automotive paste wax. To remove mildew, use a solution of warm water, mild laundry detergent and chlorine bleach (no more than 1 cup to 3 gallons of water). Do not use solvents, scouring agents, carbon tetrachloride, undiluted bleach, janitorial cleaners or gasoline. If in doubt about using a detergent and/or wax choose an inconspicuous area to test the product.
Vinyl Coated Polyester Weaves (slings)
It is important that the sling fabric be cleaned regularly. For best results, gently scrub weekly with mild detergent and warm water. (If you have trouble including this in your schedule, try to make time to hose down your furniture weekly with your garden hose). Regular cleaning will help prevent the possibility of mildew by washing out dirt particles that become trapped in the weave. Allow the furniture to dry thoroughly before storing for the winter.
Stains and mildews can be removed with a solution of warm water, mild laundry detergent (Ivory) and chlorine bleach (no more than 1 cup to 3 gallons of water). Refer to "Vinyl Strap" instructions for greater detail. Always rinse thoroughly after any cleaning.
Certain suntan lotions and insect repellants may permanently discolour any fabric. Cleaning the fabric immediately after contact can minimize this problem. Refer to "Vinyl Strap" instructions for greater details. Covering sling fabrics with a towel while tanning is recommended.
Table Tops - Acrylic
Wash acrylic table tops periodically with a mild soap or detergent (Liquid Ivory or Joy) and rinse thoroughly after cleaning. DO NOT use cleaners containing ammonia or solvents. With a lint free, clean cloth, buff dry. Avoid using solvents, scouring agents, janitorial cleaners or gasoline.
Table Tops - Glass
Clean glass table tops regularly with a soft cloth, mild detergent (Liquid Ivory or Joy), vinegar and warm water. With a lint free, clean cloth, buff dry. Commercial glass cleaners may also be used. Avoid using solvents, scouring agents, janitorial cleaners or gasoline.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
Today's wrought iron finishes are absolutely extraordinary; however, we still recommend that you follow the guidelines below in order to ensure your furniture provides you with many years of enjoyment.
CARE AND MAINTENANCE
The care of wrought iron is quite similar to the care of one's car. As with one's car, your furniture should be washed with mild soap and rinsed well on a regular basis. Do not use abrasive materials or strong detergents. Twice a year, preferably spring and fall, apply a quality non-hazing automotive liquid or paste wax to protect the paint finish. NOTE: On textured finishes, periodically apply mineral or baby oil.
Should the furniture become scratched or chipped, apply touch-up paint to the blemished area. When covering small spots of surface rust, clean area by sanding lightly and wipe immediately to prevent rust from continuing. When preparing scratched areas for touch-up painting, rub lightly with a fine steel wool to smooth the surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying time between coats. When completely finished, re-apply a quality non-hazing automotive liquid or paste wax on non-textured furniture and mineral or baby oil on textured furniture.
Wrought iron is a semi-malleable metal. As a result, if a portion of your furniture should get bent, you can straighten or level the bent piece by pulling or pushing firmly in the opposite direction of the bend.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
RECOMMENDATIONS
All Weather Wicker is an ideal material for both indoor and outdoor furniture. It is classic styling, low maintenance and weather resistant; however, a few precautions will help ensure that your furniture provides you with many years of satisfaction.
1) Place your furniture away from trees or bushes that can drip sap.
2) When not using your furniture, either remove your cushions and store away in a dry spot or invest in a quality set of furniture covers.
3) Spread a towel over your chair or chaise before you apply suntan lotion or oil. While some products are totally harmless, others may cause a fabric to "burn" or change colour as every tanning preparation uses a different chemical formulation.
CARE AND MAINTENANCE
Frame and Wicker
Minimal care is required to maintain the beauty of your natural or all weather wicker. Vacuuming the wicker with a soft brush or upholstery tool will remove organic material and prevent decay. Both the frame and the wicker can be washed with mild detergent (Liquid Ivory or Joy) and water when they become soiled, using a wet sponge to wipe the soil from the surface. Rinse with clean water and allow to air dry thoroughly before using.
As with any fine outdoor furniture, the paint finish must be maintained in order to protect the furniture from the elements and ensure its lasting strength and beauty. If the finish on the wicker becomes worn, repaint the worn area after completely cleaning and drying the furniture. Allow the paint to cure thoroughly before use.
If the finish on the frame becomes scratched or chipped, lightly sand the problem area with fine grit sandpaper, clean and dry. Finish the process by applying some exact match touch up paint which is available from most manufacturers or a comparable commercial paint.
Table Tops - Glass
Clean regularly with a soft cloth, mild detergent, vinegar and warm water. Buff the glass with a dry with a clean lint free cloth. Commercial glass cleaners may also be used. Avoid using solvents and scouring agents.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND AS WELL EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
RECOMMENDATIONS
Aluminum / Resin-Vinyl Wickers are ideal materials for both indoor and outdoor furniture. They are gracefully styled, low maintenance and extremely weather resistant, however, a few precautions will help ensure that your furniture provides you with many years of satisfaction.
1) Place your furniture away from trees or bushes that can drip sap.
2) When not using your furniture, either remove your cushions and store away in a dry spot or invest in a quality set of furniture covers.
3) Spread a towel over your chair or chaise before you apply insect repellant, suntan lotion or oil. While some products are totally harmless, others may cause the fabric to "burn" or change colour due to different chemical formulations.
CARE AND MAINTENANCE
Aluminum Frame
Apply a coat of non-hazing automotive paste wax at the start of each season as well as before putting your furniture away at the end of the season. Wipe down the frames occasionally with water mixed with liquid detergent and rinse thoroughly afterwards. During winter storage, do not store the frames upside down as damage may occur from water freezing inside the hollow aluminum frame.
Many stains can be removed with mild soap or detergent. Use "Soft Scrub" to remove more stubborn stains and light scratches. Industry cleaners may also be used.
Try to touch-up nicks and scratches promptly. When applying touch-up paint, follow the instructions and cautions on the product label. Begin by rubbing lightly with a fine steel wool to smooth the surface and improve paint adhesion. Apply thin coats of touch-up paint and allow ample drying time between coats. When complete, wax repaired area with a non-hazing automotive paste wax.
Resin Wicker
Very little maintenance is required to maintain the beauty of your resin wicker. We do recommend, however, a periodic cleaning to remove any dirt, dust or oils that may collect over time to keep your wicker looking new.
If you are using your furniture outdoors, the wicker may be washed with mild detergent and water when it becomes soiled using a wet sponge, cloth or a soft plastic bristle brush. Rinse and allow to dry thoroughly before use. For more stubborn stains, apply toothpaste or a gentle commercial abrasive cleaner (Bon Ami, Vim) to a clean, dry cloth and rub gently. Restore shine with a non-hazing automotive paste wax.
To remove mildew, use a solution of warm water, mild laundry detergent and chlorine bleach (no more than 1 cup of bleach to 3 gallons of water). Do not use solvents, scouring agents, carbon tetrachloride, undiluted bleach, janitorial cleaners, or gasoline. If in doubt about using a detergent, choose an inconspicuous area and test the cleaner.
If you are using your furniture indoors, a damp cloth with mild soap and water should be the only requirements for maintaining your wicker.
Vinyl Wicker
Similar to resin wicker, vinyl wicker requires very little maintenance. We still recommend periodic cleaning to remove any dirt, dust or oils that may collect.
If you are using your furniture outside, the vinyl wicker should be washed occasionally with a mild soap or detergent and warm water or with a water and ammonia mixture (1/4 cup ammonia per 3 gallons of water). Avoid abrasive cleaners.
Certain suntan lotions, blocks and insect repellents can permanently discolour vinyls. The possibility of this occurring can be minimized by cleaning the vinyl immediately after contact using an ammonia mixture (1/4 cup ammonia per 3 gallons of water).
Table Tops - Glass
Clean regularly with a soft cloth, mild detergent, vinegar and warm water. Buff the glass dry with a clean lint free cloth. Commercial glass cleaners may also be used. Avoid using solvents and scouring agents.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
Teak is widely regarded as the supreme hardwood furniture for many reasons. It will not rot or warp and its natural oils allow it to withstand the effects of the sun, rain, snow or frost as well as making it impervious to insects. Below are the guidelines, which, if followed properly, will allow your furniture to give you a lifetime of carefree sturdy use.
CARE AND MAINTAINANCE
The general public has the misconception that teak furniture needs to be maintained with teak oil. Although this is an option, teak itself contains and maintains a high level of natural oil and as a result, teak is an ideal timber to withstand damage that can be caused by moisture and temperature changes.
When your teak furniture arrives, it may be slightly dusty and have a waxed or polished appearance. Lightly wipe the furniture with a damp cloth to remove any dust that remains from manufacturing. The waxed appearance comes from the natural oil on the surface of the wood and will evaporate after just a few days outdoors. It is this oil, which remains below the surface of the wood, which gives teak its durability.
With new teak, you have two "looks" from which to choose. You may decide to leave the wood alone and let it age naturally or you may prefer to maintain the honey brown colour of the freshly cut teak. Below are the guidelines to help you maintain either look.
Natural Weathering
Because of the "photo-sensitivity" of teak, its appearance will, after some months left outdoors, turn a beautiful silver-grey colour. This process may take as long as nine months depending on the amount of sunlight and rain exposure. As years pass, the silver-grey surface colour will continue to darken. The end result is furniture that has a timeless look. During this time, slight "checking" may occur on the top edges of the arms and legs. You may even find a few small cracks. This is perfectly natural, as wood expands and contracts slightly when left outdoors. This will stop after a short time and does not affect the stability of the furniture in any way.
"Natural Weathering" teak can be cleaned easily with a soft nylon bristle brush and soapy water to remove garden debris, moss, mildew or other deposits. Using a mild detergent is recommended. Wire based bristle brushes should not be used because the tiny metal fragments can become embedded in the grain of the wood. These metal particles may then rust and leave black spots on the wood.
For stubborn stains, lightly sand the area with fine grade sandpaper. Remember, not too hard as you do not want to create any uneven surfaces! The original teak brown colour will reappear due to the use of the sandpaper; however, it will soon become the same colour as the rest of the furniture.
If you would like to take the cleaning process one step further, a more thorough cleaning can be accomplished using an industry "teak cleaner" or a wood deck cleaner (i.e. Thompson's Deck Cleaner), which may be found at local hardware stores. NOTE: This will give a slight "whitewash" appearance to the wood until it is back outside. Within a short period of time, the furniture will return to its silver-grey colour.
Should you decide that you would like to return the teak to the original freshly cut "honey brown" colour, this can be accomplished although it requires a fair amount of work. The steps include applying: (1) a teak cleaner; (2) a teak brightener; and, (3) either a premium teak oil or a teak sealer. NOTE: NEVER apply both oil and sealer. All of these products may be found at the store, however, remember to carefully read the instructions that come with each of these products before proceeding to the next step.
As an aside: When lounges and other teak furniture are used in humid enclosures, such as swimming pools, the surface of the teak may eventually feel a little rougher than when purchased. The reason for this is the natural "raising" of the wood grain. A light sanding with fine grit sandpaper will smooth the surface.
Maintaining The "Honey Brown" Look
If you would like to use your teak furniture outside but maintain its fresh cut colour, you will have to wipe the furniture well with a damp cloth to remove any dust that remains from manufacturing before applying a teak sealer. Teak sealers protect against aging caused by exposure to UV rays and water. It is very important that you follow the instructions that are provided with the teak sealer. Generally, you will have to repeat this procedure every season. If at anytime you decide that you would like to allow the teak to naturally weather, just leave the furniture alone to the elements and simply follow the care and maintenance instructions under the "natural weathering" section of this guide.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
For cushion cleaning instructions select the cushions page from this menu.
RECOMMENDATIONS
Today's casual fabrics are low maintenance, high style and weather resistant, however, a few precautions will help ensure that your cushions and slings provide you with many years of satisfaction.
1) Place your cushions and slings away from trees or bushes that can drip sap.
2) When not using your furniture, either remove and store your cushions or invest in a good set of furniture covers. Whenever possible store your cushions in a clean, dry place
3) Spread a towel over your chair or chaise before you apply insect repellant, suntan lotion or oil. While some products are totally harmless, others may cause the fabric to "burn" or change colour as every tanning preparation uses a different chemical formulation. So, play it safe and use a towel.
4) Clean your cushions and slings periodically. While casual furniture fabrics are designed for outdoor use, this does not mean they will not get dirty (mold and mildew can grow on dirt).
5) The fills of quality outdoor cushions are designed to allow water to pass directly through them as quickly as possible. Less expensive cushion fills use foam centers that act like a sponge by retaining water which not only will take longer to dry, but more importantly, will cause the cushion fill to breakdown prematurely. Should your cushions get wet, tilt them up on their sides and let them dry naturally outside in the breeze.
CARE AND MAINTENANCE
Acrylic Stripes and Solids (cushions only)
Acrylic fabrics are 100o/o solution dyed, are heat sensitive and resist dirt, mildew and more importantly, ultra violet rays. This means that the colours on the cushions remain vibrant much longer than those of many other fabric types. These fabrics, including Sunbrella by Glen Raven Mills, feature a soil and stain resistant finish that makes clean up a breeze. Spot wash by sponging briskly with a soapy solution of natural soap (Liquid Ivory or Joy) in lukewarm water (under 100 F). Rinse thoroughly with clean water to remove soap and air dry.
For stubborn stains, suntan lotions and insect repellants use a fabric spot remover (i.e. Shout). Follow the directions on the container. Rinse thoroughly with clean water, shake out excess moisture and allow to air dry thoroughly.
Solution-dyed acrylic does not promote mildew growth; however mildew may grow on dirt and other foreign substances that are not removed from the fabric. To clean mildew stains, prepare a mild solution of one-cup bleach plus two capfuls of dish detergent per gallon of water. Spray on the entire area and allow solution to soak in. If necessary, scrub vigorously with a sponge or clean rag. Rinse very well several times with clean water and air dry. DO NOT use solvents, scouring agents, undiluted bleach, janitorial cleaners or gasoline. If in doubt, choose an inconspicuous area and test the cleaner.
Acrylic Prints (cushions only)
Acrylic print fabrics are very similar to acrylic solids and stripes. Both fabrics share base colours that are 100o/o solution dyed, however acrylic print fabrics have addition colours that have been printed onto the fabric. As a result, though the fabric is extremely durable and the colours equally vibrant and long lasting, a little more care must be given when cleaning. Cleaning of acrylic print fabric is much the same as acrylic solids and stripes (see above) with one major exception: NEVER use bleach or harsh detergent on the fabric.
Olefin Solids and Stripes (cushions only)
Olefin fabrics (Glen Tuff by Glen Raven Mills) are made of 100o/o solution dyed olefin yarn. To keep this fabric looking fresh and new, it should be washed periodically with a solution of lukewarm water and mild soap. Most spills should be wiped up immediately after they occur. If, however, a spot or stain remains, clean with a solution of warm water and a mild detergent, then rinse thoroughly. If necessary, apply a laundry prewash, leave on for ten minutes, and reapply warm water and detergent.
For stubborn stains and mildew growth, wash with a mixture of one gallon of water, one cup of bleach and two capfuls of dish detergent. After cleaning, always rinse thoroughly with water and allow to air dry. The fabric will dry quickly because it is a natural water repellent material.
Vinyl Coated Polyester (slings)
For best results, clean weekly with a mild detergent (Liquid Ivory or Joy) and warm water. Regular cleaning of your vinyl coated polyester slings will help prevent mildew growth by washing out dirt particles that may become trapped within the weaves. Shake out excess moisture after rinsing and allow to air dry thoroughly.
To help remove stains and mildews, clean with a solution of warm water, mild laundry detergent and chlorine bleach (no more that one cup of bleach to three gallons of water). Never use a solvent type solution. Use X-14 Mildew Stain Remover for more severe growth. Other industry cleaners are also available on the market to help remove mildew.
Insect repellants and suntan lotions can reduce the life of vinyl coated polyester weaves by accelerating fading and staining. To avoid damage, wipe clean with mild laundry detergent and warm water.
DO NOT use solvents, scouring agents, carbon tetrachloride, undiluted bleach, janitorial cleaners or gasoline. If in doubt, choose an inconspicuous area and test the cleaner.
THE USE OF FURNITURE COVERS WHEN THE FURNITURE IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND THE LIFE OF THE FURNITURE AND THE CUSHIONS.
RECOMMENDATIONS
1) When using an umbrella (under 11' diameter) through a table, a minimum 40 to 50 lb base is required. The very large 11' octagon and rectangular sizes require an even greater base weight!
2) Always close your umbrella and secure tightly when not in use or during windy conditions. As an added precaution, disconnect the upper half of your umbrella and place it out of the elements during excessively windy conditions or when you are away.
CARE AND MAINTENANCE
Umbrella Housing - Anodized or Powder Coated Aluminum
For best results, we recommend periodic waxing of the main pole with an automotive paste wax to allow the center hub to slide up or down more freely. As well, periodically lubricating the spokes (with WD 40) where they connect to the center hub and also where they connect to the support ribs will allow the umbrella to operate freely.
Umbrella Housing - Wood
Little maintenance is required with these wood housings as they are generally coated with a polyurethane finish. Likewise, teak housings require minimal upkeep unless you wish to maintain the teak's original colour in which case you can restore the original colour by applying a teak brightener and then a teak sealer. With all types of wood, it is necessary that you apply oil to your umbrella finial periodically throughout the season (your standard cooking oil will do the job). The purpose of the oil is to prevent the sun from drawing out the natural oils from the wood thus causing it to dry out and crack.
Fabric Covering - Acrylic Stripes, Solids, Textures and Linens
Acrylic fabrics (including Sunbrella from Glen Raven Mills) are made of 100o/o solution dyed fibre and are heat sensitive. These fabrics feature a soil and stain-resistant finish that makes clean up a breeze. For best results, spot wash by sponging briskly with a soapy solution of natural soap (Liquid Ivory or Joy) and lukewarm water (under 100F). Rinse thoroughly with clean water to remove soap and air dry.
For stubborn stains, use a fabric spot remover (i.e.: shout), following the directions on the container. Rinse thoroughly with clean water and allow to air dry completely. Solution-dyed acrylic does not promote mildew growth; however mildew may grow on dirt and other foreign substances that are not removed from the fabric. To clean mildew stains, prepare a mild solution of one-cup bleach plus two capfuls of dish detergent per gallon of water. Spray on the entire area and allow solution to soak in. If necessary, scrub vigorously with a clean sponge or rag. Rinse very well several times with clean water and allow to air dry thoroughly.
Do not use solvents, scouring agents, undiluted bleach, janitorial cleaners or gasoline. If in doubt, choose an inconspicuous area and test the cleaner. It is recommended that you clean your umbrella's fabric covering every year before you store it away for the winter. REMEMBER to allow the fabric to air-dry thoroughly before storing.
Fabric Covering - Prints
Acrylic print fabrics are very similar to acrylic solids and stripes. Both fabrics share base colours that are 100o/o solution dyed, however acrylic print fabrics have additional colours that have been printed onto the fabric. As a result, though the fabric is extremely durable and the colours equally vibrant and long lasting, a little more care must be given when cleaning. Cleaning of acrylic print fabric is much the same as acrylic solids and stripes (see above) with one major exception: NEVER use any bleach solution or harsh cleaners on the fabric as this may damage the additional colouring. It is recommended that you clean your umbrella's fabric covering every year before you store it away for the winter.
Fabric Covering - Olefin Solids and Stripes
Olefin fabrics (Glen Tuff by Glen Raven Mills) are made of 100o/o solution dyed olefin yarn. To keep this fabric looking fresh and new, dirt should be brushed off and the fabric washed periodically with a solution of lukewarm water and mild soap (Liquid Ivory or Joy). For stubborn stains and mildew growth, wash with a mixture of one gallon of water, one cup of bleach and two capfuls of dish detergent. After cleaning, always rinse thoroughly with water and allow to air dry. The fabric will dry quickly because it is a natural water repellent material. It is recommended that you clean your umbrella's fabric covering every year before you store it away for the winter.
Do NOT use solvents, scouring agents, carbon tetrachloride, undiluted bleach, janitorial cleaners or gasoline. If in doubt, choose an inconspicuous area and test the cleaner. It is recommended that you clean your umbrella's fabric covering every year before you store it away for the winter.
THE USE OF AN UMBRELLA COVER WHEN THE UMBRELLA IS NOT IN USE OVER AN EXTENDED PERIOD OF TIME WILL MINIMIZE THE NECESSITY FOR ADDITIONAL CLEANING AND EXTEND ITS LIFE.
RECOMMENDATIONS
1) The maximum safe weight limit for your hammock is the lesser of 450 lbs, or the weight limit indicated on the hammock.
2) Do not jump up and down on your hammock (it can cause excessive wear on the hammock and the mounting hardware)
3) When you hang your hammock, be certain that it is situated so that the angle of the hammock when someone is lying in it will exceed 25 degrees.
4) A hammock can be unstable unless you always place your weight in the center of the hammock. Do not sit on the edge.
5) Do not allow the chains supplied with your hammock to become twisted or allow the hammock to flip over (which also causes the chains to twist). This drastically reduces the strength of the chain.
6) Do not allow children to use the hammock without direct adult supervision.
CARE AND MAINTENANCE
Hammock (solid cotton rope or soft spun polyester rope)
Although your hammock is intended for outdoor use, exposure to adverse weather conditions, such as rain or snow, will serve to shorten the useful life of the hammock and will affect its appearance.
When you hang your hammock for the first time, it is not uncommon for the weave to appear pulled or uneven. Simply give your hammock a vigorous shake from one side and it should straighten out. Your hammock may appear too short when you first take it out of the box, however, this special hammock rope "breathes" and will stretch out to its length with use. You may have to adjust the chain from time to time as the rope relaxes.
For cleaning, lay the hammock on a clean, dry surface that is non-abrasive. Wet it down with a hose and use a soft brush or cloth with a mild solution of warm water and detergent. When you are through, rinse the hammock thoroughly and allow it to dry completely before using or storing. Other products available from Pawley's Island include a "Hammock Shield and Cleaner / Restorer" combo kit.
Store your hammock at the end of the season in a cool, dry place. BE CERTAIN THAT IT IS NOT WET OR DAMP WHEN STORED OR THE ROPE MAY MILDEW OR ROT. If your hammock does get wet, let it dry completely before storing.
PILLOW
Prior to use, a water-repelling agent, such as "Scotch guard" can be sprayed on the pillow sham for additional protective care.
In the event that the pillow does become stained or soiled, the pillow sham may be machine washed with cold water on the gentle cycle. Completely air dry, or machine dry fabrics on a cool setting. An iron may be used on a cool setting, if desired. NEVER WASH THE INTERIOR PILLOW, AS IT WILL AFFECT THE FILL MATERIAL.
Since the pillow sham is made of natural fibres, it is not guaranteed against outdoor conditions. It should not be left outdoors in adverse or humid weather conditions to avoid stains and or mildew. When not in use, it should be stored dry in a place, which is cool and free of moisture.
Should the pillow become completely wet, dry the sham as indicated above and air-dry the interior pillow.